A collection of articles defining our times. The pages contain clickable links, don't let the titles fool you, some of the best articles have very non-descript titles and there are usually more articles on the matters in the days and week pages the links land on so it's a sort of treasure hunt through history, Enjoy!
Saturday, March 19, 2016
Friday, March 18, 2016
ALL WARS ARE BANKERS WARS - The Movie
My guess is that most Russians didn't know what Vladimir Putin did for them, but his important knowledge makes him the best man for the job in the tricky times ahead.
Thursday, March 17, 2016
9/11 Fake: As Seen On TV!
In this video we see what happens when an airliner crashes into a wooden shed!
Oh, and don't forget, jet fuel explosions only move air at about 100 mph and very briefly, so there's no way it can either cut steel or even break plate glass windows in the WTC where the windows were rated to withstand 140 mph hurricane winds for 100 hours, and would probably withstand 3ven 2 to 300 mph winds.
The energy of the aircraft is more than enough to damage the steel, but, because the aluminum is so much softer than steel, it breaks apart first, long before it reaches the point where the steel suffers any distortion. Here are the figures:
The speed of air that will tear a plane apart at sea level densities is 500 mph.
At 500 mph air creates a force equal to 674 pounds per square foot.
If an aircraft fly's below 10,000 ft. 500 mph air will rip it apart at a sea level air density of 14.7 psi.
Okay, so that's how strong or weak an aircraft is. now let's see how much force it takes to break a 14 inch box steel column.
Explosives experts will use a charge designed to move air at between 6818.2 mph and 20455 mph, which translates into forces of 125,370 pounds per square inch of pressure at the low end, to a high of 1,128,400 pounds per square inch of pressure respectively.
So we have Aircraft............ 674.23 lb/sq.ft
Steel box column:........125,370...... lb/sq.in (low)
Steel box column: ......1,128,400.....lb/sq.in (high)
Worse yet is the fact that the aircraft has to break several steel columns, not just one.
If the aircraft must break at any pressure above 674.23 lb/sq.ft. how
can it possibly stay intact and exert a force of over 125 thousand
pounds per square inch, to over 1 million pounds per square inch, on
the steel columns? That would be like saying that an egg could
penetrate a concrete wall if thrown hard enough. It can't. It will
crack open and spread it's force over a wide area, without ever even
coming close to generating the force needed to penetrate the concrete.
A 100 ton hollow ball of clay, moving at 500 mph, does have the energy needed to destroy a steel box column, but, because of it's softness/inability to withstand the pressure/forces needed to damage the column, it will never do any damage to the steel. Thus the plane becomes a "bug on the windshield" in effect, it splatters.
Oh, and don't forget, jet fuel explosions only move air at about 100 mph and very briefly, so there's no way it can either cut steel or even break plate glass windows in the WTC where the windows were rated to withstand 140 mph hurricane winds for 100 hours, and would probably withstand 3ven 2 to 300 mph winds.
The energy of the aircraft is more than enough to damage the steel, but, because the aluminum is so much softer than steel, it breaks apart first, long before it reaches the point where the steel suffers any distortion. Here are the figures:
The speed of air that will tear a plane apart at sea level densities is 500 mph.
At 500 mph air creates a force equal to 674 pounds per square foot.
If an aircraft fly's below 10,000 ft. 500 mph air will rip it apart at a sea level air density of 14.7 psi.
Okay, so that's how strong or weak an aircraft is. now let's see how much force it takes to break a 14 inch box steel column.
Explosives experts will use a charge designed to move air at between 6818.2 mph and 20455 mph, which translates into forces of 125,370 pounds per square inch of pressure at the low end, to a high of 1,128,400 pounds per square inch of pressure respectively.
So we have Aircraft............ 674.23 lb/sq.ft
Steel box column:........125,370...... lb/sq.in (low)
Steel box column: ......1,128,400.....lb/sq.in (high)
Worse yet is the fact that the aircraft has to break several steel columns, not just one.
If the aircraft must break at any pressure above 674.23 lb/sq.ft. how
can it possibly stay intact and exert a force of over 125 thousand
pounds per square inch, to over 1 million pounds per square inch, on
the steel columns? That would be like saying that an egg could
penetrate a concrete wall if thrown hard enough. It can't. It will
crack open and spread it's force over a wide area, without ever even
coming close to generating the force needed to penetrate the concrete.
A 100 ton hollow ball of clay, moving at 500 mph, does have the energy needed to destroy a steel box column, but, because of it's softness/inability to withstand the pressure/forces needed to damage the column, it will never do any damage to the steel. Thus the plane becomes a "bug on the windshield" in effect, it splatters.
Subscribe to:
Posts (Atom)